Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Opel Corsa's cabin heating radiator

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Heater core

Today's main steps will show us how to disassemble and replace the heater radiator of the Opel Corsa. First, we open the car's hood and start disconnecting the coolant tubing of the heater radiator, letting the fluid drain into a container; then we proceed with disassembling the radiator, located next to the pedals, as shown in the video. We remove the various lower dashboard plastics and disconnect the radiator tubing, unscrewing the fixing screws to remove it and replace it with the new one.

Posted on 24 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Heating Radiator from the Opel Corsa
Removing the Heating Radiator from the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Follow the procedure to remove and replace the heating radiator in the Opel Corsa. First, open the bonnet of your car and disconnect the radiator flu…
Guide to Replacing the Cabin Heater Radiator on the Opel Corsa
Guide to Replacing the Cabin Heater Radiator on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Below are the instructions that will allow you to replace the coolant in the Opel Corsa. First, open the bonnet of the vehicle and start disconnectin…
Replacing the Heater Radiator on an Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Replace the heater radiator if warm air no longer works, here's how. Remove the plastic covers from the central tunnel (near the pedals). Unscrew the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos