Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the armrest of the Opel Vivaro in case of breakage?

Model: Vauxhall Vivaro MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Seat

See other generations:
Video tutorial

The front and rear seats of the Opel Vivaro are equipped with an armrest, see video, very useful for passengers and the driver, especially if there are hours of travel to face. Whether you need to clean it or repair it, we need to remove it from its seat and here's how to do it: first, the knob must be removed, thanks to which we can rotate the armrest, so as to raise and lower it, then force is applied outwards and it is pulled out of its socket.

As we mentioned earlier, now we are able to perform a specific repair, or if you want a hygienic treatment.


Posted on 14 September 2025 by ScegliAuto


Related tutorials

How to Repair the Armrest on an Opel Vivaro - Renault Trafic
How to Repair the Armrest on an Opel Vivaro - Renault Trafic
Vauxhall Vivaro (2001-2014 / MK 1) This guide will illustrate the main steps useful for repairing the armrest on the Opel Vivaro, as well as the Renault Trafic. First, get inside the v…
How to replace the armrest of the Opel Vivaro seat?
How to replace the armrest of the Opel Vivaro seat?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the armrest of the Opel Vivaro seat, lower the hinge slider that closes the seat cover: this will allow you to remove the cover of the kno…
How to Repair the Armrest on an Opel Vivaro
How to Repair the Armrest on an Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) If you want to proceed with removing the front seat armrest on this vehicle model, you can refer to the images in the video and read the instructions…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos