Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the armrest of the Opel Vivaro seat?

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Checks and maintenance

To replace the armrest of the Opel Vivaro seat, lower the hinge slider that closes the seat cover: this will allow you to remove the cover of the knob and also remove the pin that secures the armrest to the side of the backrest. Once these components have been removed, you can completely detach the armrest from its housing, inserting the new replacement part. At this point, you can secure it again with the pin, reinserting the knob and closing the side hinge.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the armrest of the Opel Vivaro seat?
How do you replace the armrest of the Opel Vivaro seat?
Vauxhall Vivaro (2014-2019 / MK 2) The replacement of the armrest of the seat on the Opel Vivaro can be done by lowering the hinge slider that closes the seat cover: in this way it wil…
How to Repair the Armrest on an Opel Vivaro - Renault Trafic
How to Repair the Armrest on an Opel Vivaro - Renault Trafic
Vauxhall Vivaro (2001-2014 / MK 1) This guide will illustrate the main steps useful for repairing the armrest on the Opel Vivaro, as well as the Renault Trafic. First, get inside the v…
How to replace the armrest on an Opel Vivaro?
How to replace the armrest on an Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the armrest on the Opel Vivaro, lever off the circular cover at the base of the armrest using a tool. Once removed, you will find the nut …

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where is the inertia switch of the Opel Vivaro 2.5 cdtt? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos