Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Opel Corsa key.

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Key

Today we will explain how to replace the battery of a 2013 Opel Corsa vehicle remote control. To remove the battery, we need to take off the remote control cover; we then lift the key and, applying slight pressure outward, remove the cover. With the help of a small flathead screwdriver, we remove the battery and insert the new CR 2032 three-volt model. Once the battery is inserted, we close the cover and test the remote control's functionality. If the remote control does not work, it may be necessary to reprogram it or check the status of the central locking fuses through computerized diagnostics.

Posted on 26 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Opel Corsa F key
How to replace the battery of the Opel Corsa F key
Vauxhall Corsa (2019-2026 / Corsa F) To replace the battery inside the key of your Opel Corsa F by yourself, you only need a few minutes. All you have to do is carefully read the followi…
How to Dismantle the Key of an Opel Corsa
How to Dismantle the Key of an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Learn how to change the battery in an Opel Corsa key. Remove the cover plastics to access the key battery. Use a screwdriver to pry between the two p…
How to replace the remote control battery on the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the remote control battery on the Opel Corsa D, lift the emergency key by pressing the designated button on the top of the device. This wi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos