Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on an Opel Adam

Model: Vauxhall Adam MK 1 - Years 2013-2019
Part: Air filter

To replace the air filter on an Opel Adam, first open the front bonnet. Locate the air filter box, which is in the engine compartment and connected to the intake pipe. Remove the securing clips or unscrew any screws holding the cover of the box. Then lift the cover and access the filter. At this point, extract the old filter and before inserting the new one, lightly clean the seating from dust and debris. Place the new filter in the same orientation as the previous one. Close the cover and secure the clips or screws. Finally, close the bonnet and start the engine to check for correct operation.

Posted on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Opel Adam
How to replace the air filter of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) If the engine air filter of your Opel Adam is now excessively worn out and causing abnormal overheating, then it is time to replace it with a new one…
How to replace the engine air filter of the Opel Adam
How to replace the engine air filter of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) If you want to replace the engine air filter of your Opel Adam by yourself, just follow the steps described below. First of all, you need to get a To…
How to replace the cabin air filter of the Opel Adam
How to replace the cabin air filter of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) These short and simple steps will show us how to replace the cabin air filter or the pollen filter of the Opel Adam. First, we open the front passeng…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos