Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Rear Seats from an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Seat

To remove the rear seats from this vehicle, follow these instructions. First, remove the plastic caps from the mounting brackets of the rear seats; now you can unscrew the Torx screw from each bracket (there are three) to detach it from the frame. Once the seat is removed, go to the boot to unscrew the screws that secure the brackets of the backrests to the frame; now use a screwdriver to lever out the fixing pins located at the sides of the seats until they are completely removed. Proceed first on one side and then the other in the same manner. Now you can extract the seats and the rear floor will be free.

Updated on 11 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Front and Rear Seats of the Opel Corsa
How to Remove the Front and Rear Seats of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Here are the steps to remove and replace the rear seats of the Opel Corsa, following the instructions below. First, open the front door and start by …
Guide to Remove the Rear Seats on the Opel Corsa D
Guide to Remove the Rear Seats on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this brief guide, discover the steps to remove the rear seats, both the bench and the backrest, on the Opel Corsa D, following the instructions be…
How to Remove the Rear Seats from an Opel Corsa E
How to Remove the Rear Seats from an Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) In today's video, you will see how to remove the rear seats from an Opel Corsa E by following these simple steps. First, open the rear doors and the …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos