Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove and Clean the EGR Valve from a 2017 Opel Movano

Model: Vauxhall Movano MK 2, Movano B - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: EGR valve

See other generations:
Video tutorial

Here’s how to remove and clean the EGR valve from a 2017 Opel Movano. First, disconnect the electrical connectors of the valve, then remove the pipes and the bolts that secure the valve.

The video shows that there are two bolts on one side, two on the other, and additional bolts connecting to the pipe. A critical point, especially during reassembly, is the plastic support that holds the wiring.

The valve is in an awkward position and requires some force to be extracted. Once removed, use a specific cleaning product, such as Arexons, which can be found on Amazon with code B01FY0IDDQ for £14.50. In addition to the product, some elbow grease is needed to remove carbon deposits.

On the Opel Movano, the EGR valve is liquid-cooled, so there was coolant in the pipes you disconnected, which will have spilled out, resulting in the expansion tank being nearly empty, so it will need to be topped up.


Posted on 20 September 2026 by ScegliAuto


Related tutorials

Vauxhall Movano (2010-2021 / MK 2, Movano B) Good morning, today you will reset the "Service" light on your Opel Movano. Before proceeding, ensure you have completed the service. Start by turnin…
Vauxhall Movano (2010-2021 / MK 2, Movano B) In this video we hear what is defined as the "knocking in the head" of an Opel Movano, (also known as detonation). Under normal conditions, the air/f…
Vauxhall Movano (2010-2021 / MK 2, Movano B) The 'OBD' or 'On-Board Diagnostics' is a socket that allows the vehicle to be connected to a tester or onboard computer for updates or to diagnose is…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos