|
Do it yourself
| |||
| ||||
How to replace the EGR valve on the Opel/Vauxhall Mokka A
Model: Vauxhall Mokka
Mokka A
- Years 2012-2019
If you decide to replace the EGR valve on the Opel/Vauxhall Mokka A, open the bonnet and remove the plastic engine cover, then remove the coolant reservoir (without disconnecting the hoses), and remove the intake pipe that runs directly above the EGR valve. You will also need to remove the throttle body by disconnecting the electrical connector and unscrewing the four 10 mm bolts around the throttle body. Now you have access to the EGR valve: disconnect the electrical connector, unscrew the 10 mm bolts that secure the valve to the manifold, use a flat screwdriver to pry off the valve, and position the new one in the same spot. You can find it on Amazon with the code B0CJTWNZJL for £95.99, with free delivery for Prime customers. Reassemble the bolts and reconnect the connector. Remount the other components: the throttle body, the intake pipe, the coolant reservoir, and the plastic cover.
Posted on 22 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Mokka
(2012-2019 /
Mokka A)
To replace the EGR valve on the Opel Mokka, open the bonnet to access the components in the engine bay. At the rear, you will find the EGR valve conn…
Vauxhall Mokka
(2012-2019 /
Mokka A)
It will be possible to replace the EGR valve of the Opel Corsa by opening the hood so that you can access the components in the engine compartment: h…
Vauxhall Mokka
(2012-2019 /
Mokka A)
This tutorial shows how to replace the diesel filter on an Opel Mokka, a very simple and quick operation to perform at every service. First, lift the…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.178
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |