Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on an Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

This tutorial shows how to replace the diesel filter on an Opel Mokka, a very simple and quick operation to perform at every service. First, lift the left rear side of the vehicle using a jack.

Then, go underneath and locate the filter. Loosen the relevant valve with a flathead screwdriver to drain any water inside.

Next, unscrew the cap with a socket wrench, remove the old filter, insert the replacement, and reassemble everything by following the reverse procedure.


Posted on 18 June 2026 by ScegliAuto


Related tutorials

How to Remove the Petrol Filter on an Opel Mokka
How to Remove the Petrol Filter on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you start, engage first gear and activate the handbrake on your Opel Mokka. Begin by lifting the rear of the vehicle. This will give you acces…
How to Remove the Fuel Filter on an Opel Mokka
How to Remove the Fuel Filter on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let's see how to remove the fuel filter on an Opel Mokka: lift the car on a column lift or suitable jack, locate the fuel filter as shown in the vide…
How to Open the Fuel Cap on Opel Mokka
How to Open the Fuel Cap on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Want to open the fuel cap of your car? Let's see how to open the fuel flap and cap on the Opel Mokka. Open the fuel flap located on the left side of …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos