Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the lane assist on an Opel Insignia?

Model: Vauxhall Insigna MK 2, Insigna B - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

The vehicle shown in the video is an Opel Crossland, which demonstrates how to deactivate the lane assist system mentioned. The same procedure applies to the Opel Insignia, so refer to the tutorial video provided.

The lane assist, which includes an audible warning and slight steering correction in case of lane departure, is active by default. To deactivate it, simply press the button available on the dashboard or near the gear lever.

If you wish to reactivate it, press the same button again.


Posted on 26 September 2026 by ScegliAuto


Related tutorials

Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Today, we will show you how to enable or disable the automatic locking of the doors on the Opel Insignia model mk2, produced from 2017 to 2026. Turn …
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) In this tutorial we can see how to deactivate the passenger airbag in the Opel Insigna, a very simple and quick operation, to be carried out necessar…
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Let's delve into the method of resetting the Service light on the 2018 Opel Insignia, without going to the workshop and without using electronic equi…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos