Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs with LEDs on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Fog lights

In this video, you will see how to replace the bulbs with LEDs on an Opel Corsa. Remove the plastic cover at the bottom of the bumper using the appropriate screwdriver; access the side fog light located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover in the car's bumper with the attached clips. Test the correct operation of the fitted bulbs. Perform this replacement on the front fog lights to achieve the same type of illumination.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Control Knob Bulbs/LEDs on an Opel Corsa
How to Replace the Air Control Knob Bulbs/LEDs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How do you change the bulbs or LEDs for the air conditioning control knobs on an Opel Corsa? Follow this guide to proceed. Remove the dashboard trim …
How to replace the bulbs in the instrument panel of the Opel Corsa
How to replace the bulbs in the instrument panel of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) These short and simple steps will show us how to disassemble and replace the bulbs of the instrument panel of the Opel Corsa. First, we get into the …
Replacing Interior Lights with LED Bulbs
Replacing Interior Lights with LED Bulbs
Vauxhall Corsa (2006-2014 / Corsa D) Detach the cover of the interior light located near the rear-view mirror and remove the original bulbs (the central festoon and the side T5s); replac…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos