|
Do it yourself
| |||
| ||||
TPMS Sensor Learning Procedure on an Opel Astra K
Model: Vauxhall Astra
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
The video shows the learning of the TPMS sensors on an Opel Astra K after replacing a sensor (rear right wheel). The owner had removed the sensors to check the battery and replaced them all. An activation tool is needed (in the video, an EL-50448 from Amazon at code B072BK693N for £15.99). Turn on the ignition, go to the dashboard menu to the "Tyre Pressure" option. Using the wiper stalk, press and hold the "Clear" button until the system asks for confirmation: select "Yes". The horn sounds twice: the configuration mode is active. At this point, bring the tool close to each valve in the order indicated by the system: the horn sounds for each recognised sensor. The order is: front left, front right, rear right (the one replaced), rear left. Finally, the horn sounds twice and the LED turns off: the configuration is complete. The sensor frequency is 433 MHz.
Posted on 26 October 2026 by ScegliAuto
Related tutorials
Vauxhall Astra
(2015-2022 /
Astra K)
In this guide, we will see the main instructions that will allow you to learn and reset the tyre pressure warning light on an Opel Astra; before reca…
Vauxhall Astra
(2015-2022 /
Astra K)
Following these brief steps, we will see how to recalibrate the TPMS sensors and consequently reset the tire pressure warning on the Opel Astra; befo…
Vauxhall Astra
(2009-2016 /
Astra J)
Today we will show you how to disable the parking sensors on an Opel Astra model J. Let's turn on the vehicle's instrument panel and press the TAV bu…
Other guides you may be interested in
|
How to Replace the Battery in a BMW 2 Series Active Tourer?
To replace the battery in a BMW 2 Series Active Tourer, open the hood to access the components in the engine compartment: in the upper right corner, just below the windshield on the driver's side, you will find a panel to remove. The battery is located under this panel and can be removed by loosening the screws that secure it and disconnecting the power cables; this will allow you to connect and install the new battery to ensure everything functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.070
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |