Do it yourself
Frequently asked questions about cars and motorcycles

When Should the Timing Belt be Replaced on an Opel Insignia?

Model: Vauxhall Insigna MK 2, Insigna B - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Timing belt

See other generations:
Video tutorial

The timing belt on an Opel Insignia should be replaced at 60,000 miles. In most cases, the belt wears out due to normal and continuous use of the vehicle.

There are instances where the timing belt may break due to lack of inspections and specific maintenance. Replacement costs range from £800 to £1,200 depending on the cost of the replacement part and workshop labour rates.

To install the belt, unscrew the tensioner pulley using a socket spanner. It is advisable to lubricate the belt with grease before fitting.


Posted on 14 November 2026 by ScegliAuto


Related tutorials

Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Here are the instructions for removing and replacing the timing belt on the Opel Insignia 2.0 CDTI. First, open the bonnet and remove the timing belt…
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this guide we will see the steps that will allow us to disassemble and replace the timing belt of the Opel Insignia 2.0 CDTI. First of all, we ope…
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To replace the timing belt on the Opel Insignia, lift the car so that you can remove the front right wheel and the corresponding wheel arch liner. Un…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos