Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Opel Insignia 2.0 CDTI

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

In this guide we will see the steps that will allow us to disassemble and replace the timing belt of the Opel Insignia 2.0 CDTI. First of all, we open the hood of the car and start disassembling and removing the engine support; then we remove the alternator belt, loosening the tensioner; we lift the car and remove the crankshaft pulley, then remove the distribution cover, as shown in the video.

At this point, we take the necessary references for the replacement of the belt, installing the original one.


Posted on 19 August 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Here are the instructions for removing and replacing the timing belt on the Opel Insignia 2.0 CDTI. First, open the bonnet and remove the timing belt…
How do you replace the timing chain of the Opel Insignia 1.6 CDTi?
How do you replace the timing chain of the Opel Insignia 1.6 CDTi?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) It will be possible to replace the timing chain of the Opel Insignia 1.6 CDTi by loosening the screws that secure the front right wheel of the car: t…
How to Replace the Timing Belt on the Opel Insignia?
How to Replace the Timing Belt on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To replace the timing belt on the Opel Insignia, you need to remove the engine from its housing so that the front protective panel can be taken off. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos