Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing chain of the Opel Insignia 1.6 CDTi?

Model: Vauxhall Insigna MK 2, Insigna B - Years 2017-2026
Part: Timing belt

It will be possible to replace the timing chain of the Opel Insignia 1.6 CDTi by loosening the screws that secure the front right wheel of the car: this wheel can then be removed so that the inner wheel arch panel can be detached. At this point, it will be possible to loosen the screws that secure the chain tensioner in order to remove it completely: the tension of the chain will be reduced and it will be possible to remove it from the sprockets. The new chain can now be inserted in order to bring it back to the correct tension and verify its operation.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Turbocharger from Opel Insignia 1.6 CDTi
How to Remove the Turbocharger from Opel Insignia 1.6 CDTi
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) The main instructions in this guide will show you how to remove and replace the turbocharger of the Opel Insignia 1.6 CDTi. First, open the bonnet of…
Replacing the Glow Plugs on the Opel Insignia 1.6 CDTi MK1
Replacing the Glow Plugs on the Opel Insignia 1.6 CDTi MK1
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this video, follow the instructions to remove and replace the glow plugs on the first series Opel Insignia, with a 1.6 CDTi Ecotec engine. First, …
Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Here are the instructions for removing and replacing the timing belt on the Opel Insignia 2.0 CDTI. First, open the bonnet and remove the timing belt…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos