Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on an Opel Meriva A

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Headlight bulb

To access the headlight bulbs, you can also go through the wheel arch, but it is easier to access from the top. Therefore, lift the bonnet and unscrew the T20 Torx screws shown in the video to remove the cover beneath the two screws and then the small air duct (this is if you need to access the right headlight, as shown in the video). Now unscrew the connector of the affected bulb by pulling it out along with the bulb itself. Remove the bulb from the connector and insert the new one, then reverse the process until fully reassembled. Good luck!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on an Opel Meriva
How to Replace the Headlight Bulbs on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Here’s how to replace the headlight bulbs on an Opel Meriva: Open the front bonnet by pulling the lever located at the bottom right of the dashboard …
How to replace the rear headlight bulbs of the Opel Meriva
How to replace the rear headlight bulbs of the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) In this guide we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Meriva. First of…
Replacing the Front Headlamp Bulb on Opel Meriva
Replacing the Front Headlamp Bulb on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Below are the steps necessary to remove and replace the dipped beam bulb of the front headlamp on an Opel Meriva. First, open the bonnet of your car …

Other guides you may be interested in

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos