Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on an Opel Meriva B

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Headlight bulb

In this video tutorial, you will learn how to disassemble and replace the front headlight bulb on an Opel Meriva B. First, open and lift the bonnet, and remove the washer fluid reservoir tube to access the bulb located at the back of the headlight; then remove the plastic protective cover. At this point, disconnect the electrical connector of the bulb and unclip the metal spring to extract the bulb, as shown in the video; simply replace it with a new one of the correct type (in this case, with an H7 fitting), and reassemble everything!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Change the Bulb on an Opel Meriva
Change the Bulb on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Want to replace the bulbs on your Opel Meriva? Here’s how to remove the front headlight bulbs. Locate the inspection cover at the back of the headlig…
How to Replace the Headlight Bulbs on an Opel Meriva
How to Replace the Headlight Bulbs on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Here’s how to replace the headlight bulbs on an Opel Meriva: Open the front bonnet by pulling the lever located at the bottom right of the dashboard …
Replacing the Front Headlamp Bulb on Opel Meriva
Replacing the Front Headlamp Bulb on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Below are the steps necessary to remove and replace the dipped beam bulb of the front headlamp on an Opel Meriva. First, open the bonnet of your car …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos