Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on the 2007 Opel Meriva?

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

By watching the attached video, you can learn how to DIY replace the front headlamp on the 2007 Opel Meriva. Start by removing the lateral, upper, and importantly, the rear locking pins, which can only be accessed after partially removing the front wheel arch.

After this, disconnect the electrical connectors and pull the headlight unit out of its position. Now, install the new headlamp using the reverse procedure.


Posted on 15 August 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on Opel Meriva
Replacing the Front Headlamp Bulb on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Below are the steps necessary to remove and replace the dipped beam bulb of the front headlamp on an Opel Meriva. First, open the bonnet of your car …
How to Replace the Bulbs in the Front Headlamp of an Opel Meriva
How to Replace the Bulbs in the Front Headlamp of an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Let’s see how to replace the bulbs in the front headlamp of an Opel Meriva: open the front bonnet and pull the lever located at the bottom right of t…
How to Remove the Front Headlight and Bumper on the Opel Meriva
How to Remove the Front Headlight and Bumper on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Let's briefly go over the instructions to remove and replace the front headlight and bumper on the Opel Meriva. First, open the bonnet and start by r…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos