Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Opel Mokka, open the driver's door and check the recommended inflation pressure values on the sticker attached to the pillar. The tyres must be inflated to the indicated pressure; once inflated, go inside the cabin and start the engine so the sensor can read the new tyre pressure value. You may need to drive for a few miles for the sensor to register the value; after the reading, the warning light will turn off.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will provide instructions to allow you to recalibrate the tyre pressure sensors on the Opel Mokka. Before resetting the TPMS …
How do you reset the tire pressure warning light on the Opel Mokka?
How do you reset the tire pressure warning light on the Opel Mokka?
Vauxhall Mokka (2020-2026 / Mokka B) To reset the tire pressure warning light on the Opel Mokka, you need to turn on the instrument panel by inserting the ignition key into the correspon…
Resetting the Tyre Pressure Warning Light on the Opel Mokka
Resetting the Tyre Pressure Warning Light on the Opel Mokka
Vauxhall Mokka (2020-2026 / Mokka B) Quickly and easily reset the tyre pressure monitoring system (TPMS) warning light on the Opel Mokka. Before resetting, ensure all four tyres are at t…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos