Do it yourself
Frequently asked questions about cars and motorcycles

The Fuse Box Diagram in an Opel Astra H

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Fuse box

If you have an already purchased Opel Astra H, you need to gather some information about its fuse box. This box is located near the vehicle's battery, and to see inside, use a flathead screwdriver, press the two side buttons, and remove the cover. Each fuse has a specific role in the operation of the vehicle's engine, such as: anti-lock system (20A), radiator fan (30A, 40A), windscreen washer (10A), gearbox (30A), engine control module (20A, 7.5A), etc. However, like in every car, there is also another fuse box located on the right side of the boot. To open it, turn the two clips 90 degrees and fold the cover down. These fuses also have various functions and all play an important role in the operation of the vehicle.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Astra (2015-2022 / Astra K) The steps outlined in this guide will show you the positioning and diagram of the internal fuses of the Opel Astra. First, get inside the vehicle and…
Vauxhall Astra (2004-2010 / Astra H) From the images shown in the tutorial video uploaded here, we can clearly see where one of the fuse boxes of the Opel Astra H is located, but there i…
Vauxhall Astra (2004-2010 / Astra H) Today, discover the procedure to locate the positioning of the fuse boxes in the Opel Astra. First, open the boot lid and remove the plastic cover lo…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2004-2010 - What is the cigarette lighter fuse on Opel Astra h? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos