Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Boot Lock on an Opel Corsa C

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Trunk lock

See other generations:
Video tutorial

In this video, we will discover the steps to remove and replace the boot lock on an Opel Corsa C, third series, following the instructions below. First, open the tailgate and start by unscrewing the screws of the plastic panel using a socket wrench; once removed, you can access the lock, as shown in the video.

At this point, disconnect the lock rod and unscrew its fixing screws; disconnect the electrical connector and use a Torx screwdriver to remove it and replace it with the new one!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Boot Lock on the Opel Corsa
Guide to Replacing the Boot Lock on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's instructions will show you how to remove and replace the boot lock on the Opel Corsa. First, open the boot lid and start unscrewing the two f…
How to Open the Boot of an Opel Corsa
How to Open the Boot of an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Here’s how to open the boot of your Opel Corsa when the central locking is not working. Open the boot of your car using the appropriate ignition key.…
What to do if the boot of the Opel Corsa won't open?
What to do if the boot of the Opel Corsa won't open?
Vauxhall Corsa (2006-2014 / Corsa D) In the Opel Corsa, the boot lid may become stuck, for example, due to a fault with the actuator or the control button. In these cases, it is still po…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos