Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake pads

See other generations:
Video tutorial

This guide shows how to remove the brake pads from the car. After removing the tyre from the affected side, unscrew the two bolts securing the caliper and, using a flat screwdriver, push the piston back to allow the part to come out. Now you can pull out the brake pads and the sliding guides (which should be maintained) from the housing.

Replace with new pads and check the correct positioning.

Refit the brake caliper and tighten the securing bolts. At this point, the operation is complete.

The tools required for the replacement are: - Spanner; - Flat screwdriver.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on the Opel Mokka
Replacing the Front Brake Pads on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Briefly see how to remove and replace the front brake pads on the first series Opel Mokka in simple, quick steps. First, lift the vehicle and remove …
How to Replace the Rear Brake Pads on the Opel Mokka
How to Replace the Rear Brake Pads on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today, you will see step-by-step instructions for removing and replacing the rear brake pads on the first series Opel Mokka. First, loosen the wheel …
Replacing the Rear Brake Pads of the Opel Mokka
Replacing the Rear Brake Pads of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, you will learn how to remove and replace the rear brake pads of the Opel Mokka by following these simple steps. First, lift t…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos