Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads in the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Brake pads

In this tutorial, see how to replace the front brake pads in the Opel Mokka, a very simple and quick operation. First, lift the front of the vehicle, taking all necessary safety precautions, then open the bonnet and remove the cap from the brake fluid reservoir. Next, remove the wheels, compress the piston with a clamp, undo the lower pin, and separate the caliper from the disc. At this point, remove the old pads, clean any dirt residue, position the replacements, and follow the reverse procedure. Finally, check the brake fluid level and top it up if necessary.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on the Opel Mokka
Replacing the Front Brake Pads on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Briefly see how to remove and replace the front brake pads on the first series Opel Mokka in simple, quick steps. First, lift the vehicle and remove …
A defect in the braking system of the Opel Mokka 1st series 1.7 CDTi.
A defect in the braking system of the Opel Mokka 1st series 1.7 CDTi.
Vauxhall Mokka (2012-2019 / Mokka A) The first series Opel Mokka has had some problems with the braking system, especially in the 1.7 TDCi engines with the engine code A17DTS; in fact, m…
How to Replace the Rear Brake Pads on the Opel Mokka
How to Replace the Rear Brake Pads on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today, you will see step-by-step instructions for removing and replacing the rear brake pads on the first series Opel Mokka. First, loosen the wheel …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos