Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Central Locking on Opel Corsa B

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Door lock

Remove the panel located at the bottom left of the steering wheel, near the driver's door. From the cover you have removed, you will be able to extract the various wires from the control unit: use the two white wires to connect them to the central locking control unit you purchased, which costs around £10 - £15 on various online sites. Arrange the wires properly so that they can be easily reinserted once the job is finished. Connect the positive to one of the fuses in the fuse box and the negative to the antenna, as shown in the video. Check that it works with the key provided.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Boot of an Opel Corsa
How to Open the Boot of an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Here’s how to open the boot of your Opel Corsa when the central locking is not working. Open the boot of your car using the appropriate ignition key.…
Guide to Replacing the Boot Lock on the Opel Corsa
Guide to Replacing the Boot Lock on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's instructions will show you how to remove and replace the boot lock on the Opel Corsa. First, open the boot lid and start unscrewing the two f…
Where are the fuses located in the Opel Corsa D?
Where are the fuses located in the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) The fuses for the Opel Corsa D are located within the designated fuse boxes inside the car. This model has three fuse boxes: the first in the engine …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos