Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fit the exterior mirror on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Side mirror

Before we can start, we will have to go and open the door of our Opel Corsa. Using a flat-blade screwdriver and leveraging it, we begin by disengaging and removing the cover located near the rear-view mirror, and then remove the rubber of the mirror adjustment control itself. By doing so, we will have discovered the Torx screws that secure the mirror to the door. Let's proceed then going to unscrew and remove these screws, with the help of a Torx T25 screwdriver. When we have completed this last step, we will be able to remove the mirror, and we will have finished the disassembly.

Posted on 14 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Exterior Mirror on an Opel Corsa
How to Remove the Exterior Mirror on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) How do you remove the mirror from your car? Watch this video to see how to remove the exterior rear-view mirror on an Opel Corsa. Remove the plastic …
How to replace the mirror mirror of an Opel Corsa
How to replace the mirror mirror of an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Let's see how to remove the exterior mirror glass on Opel Corsa. With a lever (plastic or rubber coating) we go to pry between the perimeter of the m…
Replacement of the rear view mirror of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replacement of the exterior rear view mirror on an Opel Corsa. With a plastic lever we go to pry between the perimeter of the mirror frame and the mi…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos