Do it yourself
| ||||
|
Vauxhall Corsa - Video tutorial
Model: Vauxhall Corsa
Corsa C
- Years 2000-2006 To replace the ABS sensor on the Opel Corsa we start by scanning through the obd socket of the car, we select the vehicle characteristics required by the program and we notice the error of the ABS sensor on the right front wheel (it lights up also the ABS light). At the end of the scan we move on to the right front wheel: we loosen the wheel bolts, lift the car and finish unscrewing the bolts by removing the wheel; behind the brake disc we find the cable of the ABS sensor that we are going to change (one end is connected to a bolt and the other end to a pin), then disconnect the pin and unscrew the bolt with a hex wrench. We take the new ABS sensor, connect the pin and screw the bolt with a hex wrench, finally position the wheel, screw the bolts by hand, lower the car and finish tightening the bolts.
Posted on 25 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |