Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Sensor on an Opel Corsa

Model: Vauxhall Corsa Corsa F - Years 2019-2026
Part:

When the inflation pressure of one of the four tyres drops below a set minimum value, the low tyre pressure warning light (TPMS) will illuminate on the display. First, check the tyre pressures and restore them to the recommended levels as per the owner's manual. Then, switch on the vehicle's ignition. On the touchscreen, click the car symbol to access the submenu. Click on "reset tyre deflation warning", which will start the reset procedure for the warning light (which will turn off) and update the tyre pressure readings.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the tire pressure sensors of the Opel Corsa.
Reset the tire pressure sensors of the Opel Corsa.
Vauxhall Corsa (2014-2019 / Corsa E) Today's information will show us how to reset the tire pressure sensors of the Opel Corsa; before resetting the pressure warning light, it is necessa…
Resetting the Tyre Pressure Light on an Opel Corsa
Resetting the Tyre Pressure Light on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Below are the steps to reset the tyre pressure light on an Opel Corsa; before performing the reset, ensure all four tyres are at the correct operatin…
How to reset the tyre pressure warning light on the Opel Corsa?
How to reset the tyre pressure warning light on the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) To reset the tyre pressure warning light on the Opel Corsa, ensure that all four tyres are at the correct inflation pressure. Once the pressure has b…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos