Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Side Indicator Bulb

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Side marker bulb

The side indicator is simply clipped into its housing on the wing: to remove it, gently push it forward to slightly compress the plastic fastening tab, and pull it outwards to extract it completely. At this point, unclip the bulb holder, remove the bulb (T5 fitting), and insert the new one; then reposition the bulb holder and check its operation before refitting the indicator. Once you are sure of the correct operation of the indicator, clip the unit back into its housing, inserting the rear part first and then the front.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Side Indicator Bulb
Replacement of Side Indicator Bulb
Vauxhall Corsa (2006-2014 / Corsa D) Once the front bonnet is open, there is enough space to reach the bulb of the front indicator; the bulb holder has a convenient tab that allows you t…
Replacing the Indicator Bulb on the Opel Corsa
Replacing the Indicator Bulb on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the main steps to remove and replace the front indicator bulb on the Opel Corsa. First, open the bonnet by pulling the internal lever, and …
How to Replace the Front Indicator Bulb on an Opel Corsa
How to Replace the Front Indicator Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the bonnet of your Opel Corsa. Start by turning the base of the blown bulb anti-clockwise to remove it from its housing. N…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos