Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Replacement of the turn signal bulb on the Opel Corsa.

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Light bulb
Operation: Replacement of the turn signal bulb on the Opel Corsa.

Below we will see the main steps useful for disassembling and replacing the front turn signal bulb of the Opel Corsa. First of all, we open the engine hood by pulling the internal lever and begin to rotate the bulb socket of the turn signal bulb, disconnecting its electrical connector; then we rotate the bulb to remove it, as shown in the video. At this point, we proceed to install the new turn signal bulb, of the right type and with the same attachment; we reassemble the bulb socket on the headlight assembly, also replacing the other bulbs of the front headlight if necessary!


Posted on 1 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2006-2014 - How to remove the Opel Corsa high beam bulb? Read Answer
    • Corsa 2000-2006 - How to replace the sidelight bulbs on the Opel Corsa C? Read Answer
    • Corsa 2006-2014 - What does code 18 mean in the Opel Corsa? Read Answer
    • Corsa 2019-2026 - What does code 23 mean on the Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does code 21 mean in the Opel Corsa? Read Answer
    • Corsa 2000-2006 - What bulbs are in the Opel Corsa? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos