Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part:

In this short video tutorial today we are going to see how to reset the tire pressure warning light on an Opel Mokka. Let's start by turning on the instrument panel but without starting the car, now we press the menu button located on the control lever located to the left of the steering wheel and scroll down the drop-down menu until we reach the relative item of the tires, click on it with the SET / CLR end lever button and select the tire variants shown on the information display, now click again on the SET / CLR button to select and confirm the reset.

Posted on 7 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire warning light in the Opel Mokka?
How to reset the tire warning light in the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) Resetting the tire warning light in the Opel Mokka is a very simple operation, let's see how to proceed in this tutorial. Obviously, this procedure m…
How to reset the tire warning light on the Opel Mokka
How to reset the tire warning light on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) The guide shows you how to reset the Opel Mokka tire pressure warning light. The first step is to place the car on a flat surface. Once the instrumen…
How to reset the Opel Mokka X engine oil warning light
How to reset the Opel Mokka X engine oil warning light
Vauxhall Mokka (2012-2019 / Mokka A) Let's find out how to reset the Opel Mokka X engine oil change routine maintenance warning light. First of all we get on board the car and start scro…

Other guides you may be interested in

How to Replace the Front Headlight Bulbs on an Opel Mokka

Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the rubber inspection cap on the back of the headlight and remove it. Disconnect the bulb holder from the headlight and extract the damaged bulbs with the help of a screwdriver. Install the new bulbs (always ensure they are the correct type and size) and insert the bulb holder back into the headlight housing. Reassemble all previously removed parts (headlight cover cap).

Watch the video!


by ScegliAuto

More videos