Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part:

Resetting the tyre warning light in the Opel Mokka is a very simple operation. Follow this tutorial. This procedure should only be followed after restoring the correct pressures, which can be checked on the label located on the inside of the driver's door. Turn on the ignition and press the "menu" button on the left stalk until the tyre screen appears on the display. Rotate the dial and select the setting you wish to activate: low load, economy, or high load. At this point, press the "set/clr" button to confirm your choice.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on an Opel Mokka, first inflate all tyres to the recommended pressure values, which are listed on the sticke…
How do you reset the tire pressure warning light on the Opel Mokka?
How do you reset the tire pressure warning light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) It will be possible to reset the tire pressure warning light of the Opel Mokka by inflating the tires to the appropriate pressure value: this value w…
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on the Opel Mokka, open the driver's door and check the recommended inflation pressure values on the sticker…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos