Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on an Opel Corsa?

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Cabin air filter

To replace the cabin filter on an Opel Corsa, remove the plastic cover from the side of the passenger footwell. Once this cover is removed, loosen the screws that secure the filter cover, remove it, and take out the filter from its housing. After the old filter is removed, insert a new one, close its housing, and secure the cover with the appropriate screws. Finally, reinsert the side cover of the footwell.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on an Opel Corsa B
How to Replace the Cabin Air Filter on an Opel Corsa B
Vauxhall Corsa (1993-2000 / Corsa B) Replacing the cabin air filter on your Opel Corsa B can be a bit complex for those not familiar with this type of task, but with the following guide,…
How to replace the cabin air filter of the 2022 Opel Corsa
How to replace the cabin air filter of the 2022 Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) Thanks to the steps described in this new guide, you will be able to complete the replacement of the cabin air filter of your 2022 Opel Corsa in just…
How to Remove the Cabin Air Filter from an Opel Corsa
How to Remove the Cabin Air Filter from an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you begin, sit in the front passenger seat of your Opel Corsa. Start by unscrewing and removing the screws that secure the lower cover of the …

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the cabin filter of the Opel Corsa 2008 located? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos