Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on an OPEL Vehicle

Model: Vauxhall Opel Various
Part: Tire pressure warning light

To reset the TPMS light on an OPEL vehicle (the procedure is the same for all models), enter the car and close all doors. Pull the handbrake and put the gearbox in neutral. Now turn on the ignition - without starting the engine - and press the menu button located to the left of the steering wheel, on the indicator stalk. Using the up/down buttons next to it, search for the submenu "TYRE LEARN" or "tyre pressure". Once found, press and hold the SET-CLR button, which is the satellite button on the indicator stalk (which we have been using so far) for 5 seconds. The car will emit a double honk and is ready to learn the new pressures. Keep the ignition on. Read the sensors in a clockwise direction starting from the front left tyre, front right, rear right, and rear left. Each time a sensor is read, the vehicle will emit a honk. At this point, the learning of the pressures is complete.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the Key on an Opel Vehicle
How to Program the Key on an Opel Vehicle
Vauxhall Opel Various Today, you will learn how to program the key of an Opel vehicle. Programming a new key becomes almost mandatory when performing maintenance tasks suc…
How do you reset the infotainment system of Opel cars?
How do you reset the infotainment system of Opel cars?
Vauxhall Opel Various In order to reset the infotainment system on Opel vehicles, you will need to insert the ignition key into the slot and turn it to also turn on the in…
How to open the remote key of an Opel?
How to open the remote key of an Opel?
Vauxhall Opel Various In this tutorial, see how to open the remote key of an Opel, a very simple and quick operation, for example, if you need to replace the battery. Firs…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos