Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on an Opel Astra?

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Starter motor

In this tutorial, you will learn how to remove the starter motor on an Opel Astra, a simple task if you have good manual skills. First, disconnect the negative terminal of the battery for safety. Then, go underneath the vehicle and locate the starter motor, positioned just above the left driveshaft. Next, disconnect the two power terminals by unscrewing the respective nuts, remove the mounting bolts of the starter motor, and separate it from the engine block. To install the new part, simply follow the reverse procedure.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from the Opel Astra
Removing the Starter Motor from the Opel Astra
Vauxhall Astra (2009-2016 / Astra J) In this short and simple guide, you will learn how to remove and replace the starter motor of the Opel Astra. First, raise the vehicle to access the …
Replacing the Starter Motor on an Opel Astra
Replacing the Starter Motor on an Opel Astra
Vauxhall Astra (1998-2006 / Astra G) Remove the starter motor if damaged. Open and lift the front bonnet, then disconnect the battery terminals. Remove the battery and its tray. Locate t…
How to Replace the Starter Motor on an Opel Astra H?
How to Replace the Starter Motor on an Opel Astra H?
Vauxhall Astra (2004-2010 / Astra H) To replace the starter motor on an Opel Astra H, open the bonnet to disconnect the battery. Once the battery is disconnected, access the lower part o…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2004-2010 - Where is the starter motor located in the Opel Astra h 1.7 CDTI? Read answer
    • Astra 2004-2010 - Where is the starter on the Opel Astra located? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos