Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Vivaro?

Model: Vauxhall Vivaro MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

Before resetting the service light, you must have completed all the checks that the manufacturer has specified for that particular time/mileage interval. To perform the reset, you will use the accelerator and brake pedals.

Get into the vehicle and close all four doors. Turn on the ignition without starting the engine; Press and hold the accelerator pedal fully.

While holding the accelerator pedal, press the brake pedal fully three times. This will reset the service message.

Check by turning off the ignition and then turning it back on.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) .. Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic.. …
How to Reset the Service Light on an Opel Vivaro
How to Reset the Service Light on an Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Here’s how to reset the Service light on the Opel/Vauxhall Vivaro: first, get in the vehicle and close all the doors; also engage the handbrake. Then…
How to Reset the Service Light on a 2018 Opel Vivaro
How to Reset the Service Light on a 2018 Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today, we will outline the steps to reset the service light related to the service on the 2018 Opel Vivaro. Start by turning on the instrument cluste…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos