Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vivaro
    4. : Guide to disassembling the engine of the Opel Vivaro 1.9 - Renault Trafic

Vauxhall Vivaro - Video tutorial

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Engine
Operation: Guide to disassembling the engine of the Opel Vivaro 1.9 - Renault Trafic

Today we will see, in this video tutorial, how to remove the engine from the chassis of the Opel Vivaro 1.9, but also of the Renault Trafic. First of all, we open the bonnet and start removing the front bumper; then we go to disassemble the cooling system, removing the radiator and disconnecting all the various pipes. At this point we lift the car and drain the engine oil; we disconnect the drive shafts and disassemble the engine support, disconnecting the various electrical wirings. We use a jack to remove the engine from the body, following the video tutorial to the end!


Posted on 3 May 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vivaro 2014-2019 - What are the problems with the engine on the Opel Vivaro? Read Answer
    • Vivaro 2014-2019 - What problems could the 1.6 biturbo engine of the Opel Vivaro present? Read Answer
    • Vivaro 2001-2014 - What problems does the 1.6 engine of the Opel Vivaro have? Read Answer
    • Vivaro 2014-2019 - What problems does the engine of the Opel Vivaro 1.6 cdti have? Read Answer
    • Vivaro 2014-2019 - What problems could the Opel Vivaro biturbo present? Read Answer
    • Vivaro 2014-2019 - How much engine oil does it take for a Vauxhall / Opel Vivaro 1.6? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos