Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Opel Vivaro - Renault Trafic

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Front bumper

Here are the steps that will allow you to remove and replace the front bumper of the Opel Vivaro, as well as the Renault Trafic. First, open the engine bonnet of your car and start removing the front grille of the bumper by unscrewing the screws; then unscrew the additional screws located underneath, as shown in the video. At this point, also remove the front lights, subsequently removing the side screws (using a Torx screwdriver); now gently unclip the bumper from the sides to remove it completely, applying the reverse procedure for reassembly!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Engine from the Opel Vivaro 1.9 - Renault Trafic
Guide to Removing the Engine from the Opel Vivaro 1.9 - Renault Trafic
Vauxhall Vivaro (2001-2014 / MK 1) .. chassis of the Opel Vivaro 1.9, as well as the Renault Trafic. First, open the bonnet and start by removing the front bumper; then, dismantle the cooling.. …
Guide to Removing the Starter Motor from the Opel Vivaro - Renault Trafic
Guide to Removing the Starter Motor from the Opel Vivaro - Renault Trafic
Vauxhall Vivaro (2001-2014 / MK 1) .. starter motor of the Opel Vivaro, as well as the Renault Trafic 1.9 DCI. First, open the bonnet and start by disconnecting the coolant hose, allowing.. …
How to Remove the Front Bumper of an Opel Vivaro
How to Remove the Front Bumper of an Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Before starting, open the front bonnet of your Opel Vivaro. Begin by unscrewing and removing the screws and bolts on the front side of the grille, th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos