Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Engine oil

Video tutorial
Detailed instructions - Today, you will learn how to change the engine oil on an Opel Vivaro. Before proceeding with the oil change, lift the vehicle on a jack or axle stands. Open the front bonnet and unscrew the oil filler cap. Using a 7 mm socket, unscrew the nuts that secure the engine cover. Using a 10 mm socket, unscrew the sump plug to allow the used oil to drain into a container. Replace the washer on the plug before reinserting it. Using a specific tool for removing the filter, unscrew the 20 mm nut. Insert the new oil filter, and after closing the filler cap, refit the engine cover. Once the vehicle is back on the ground, pour 7.5 litres of new oil into the reservoir.

Posted on 1 October 2026 by ScegliAuto


Related tutorials

How to change the engine oil and oil filter on the Opel Vivaro 1.6 CDTi
How to change the engine oil and oil filter on the Opel Vivaro 1.6 CDTi
Vauxhall Vivaro (2014-2019 / MK 2) Below are the steps on how to perform routine maintenance by changing the engine oil and oil filter on the Opel Vivaro 1.6 CDTi. First, lift the vehi…
How to Change the Engine Oil on the Opel Vivaro
How to Change the Engine Oil on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) To change the engine oil on the Opel Vivaro, lift the vehicle with a jack to access the underside of the engine bay. Here, locate the oil drain plug,…
Engine Oil and Oil Filter Replacement on Opel Vivaro 2.0 CDTi
Vauxhall Vivaro (2001-2014 / MK 1) In this video, learn how to remove and replace the engine oil and oil filter while performing the regular maintenance service on a 2013 Opel Vivaro 2…

Other guides you may be interested in

How to reset the electronic handbrake of the Renault Scenic?

To reset the electronic handbrake on the Renault Scenic, turn on the instrument panel by inserting the ignition key into its slot. Once the panel is on, remove the protective panel of the dashboard located at the bottom left of the steering column. This will allow you to extract the handbrake button and disconnect the connector from the entire device. The lever on the button must be pulled down and then lifted again to restore the handbrake.

Watch the video!


by ScegliAuto

More videos