Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Oil filter

We begin the oil change by opening the front hood of the vehicle and unscrewing the oil tank cap, in order to pour in the pre-change liquid that will need to act for five minutes with the engine running in order to eliminate all residues of the used oil once it has been drained from the oil pan. We lift the front part of our Vivaro and let the oil drain into a container by unscrewing the nut on the oil pan. We unscrew the nut, located in order to remove the box and be able to replace the filter. We clean the housing of the box, replace the gaskets, and install the new filter inside. We bring the vehicle back to the ground by removing the stands, and pour about 4 liters of engine oil into the tank. We close the front hood and start the vehicle's engine to warm up the oil and check that the level is adequate in the container.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Opel Vivaro
How to Change the Engine Oil on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) To change the engine oil on the Opel Vivaro, lift the vehicle with a jack to access the underside of the engine bay. Here, locate the oil drain plug,…
How to change the engine oil and oil filter on the Opel Vivaro 1.6 CDTi
How to change the engine oil and oil filter on the Opel Vivaro 1.6 CDTi
Vauxhall Vivaro (2014-2019 / MK 2) Below are the steps on how to perform routine maintenance by changing the engine oil and oil filter on the Opel Vivaro 1.6 CDTi. First, lift the vehi…
Engine Oil and Oil Filter Replacement on Opel Vivaro 2.0 CDTi
Vauxhall Vivaro (2001-2014 / MK 1) In this video, learn how to remove and replace the engine oil and oil filter while performing the regular maintenance service on a 2013 Opel Vivaro 2…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos