Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vivaro
    4. : Removing the oil filter on Opel Vivaro

Vauxhall Vivaro - Video tutorial

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Oil filter
Operation: Removing the oil filter on Opel Vivaro

Replacing the oil filter on an Opel Vivaro, how to do the replacement. We lift the vehicle with a column bridge, unscrew the pin of the oil pan; let the liquid flow into a container. With a socket wrench we unscrew the large locking pin of the container cap where the oil filter is located, extract the worn oil filter and place a new one. We lift up the front hood, we secure the same. Finally we top up the new liquid and close the front hood. We replace all filters and top up all levels in the engine compartment.


Posted on 10 December 2023 by ScegliAuto



How do you replace the engine oil of the Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) In order to replace the engine oil of the Opel Vivaro, you need to lift the vehicle with a jack so that you can access the bottom part of the engine
Replacement engine oil and oil filter on Opel Vivaro 2.0 CDTi
Vauxhall Vivaro (2001-2014 / MK 1) Let's see in this video how to remove and replace the engine oil and the oil filter, performing the regular routine maintenance service, on a 2013 Op
How to replace the oil filter and oil on an Opel Vivaro 2 vehicle.
Vauxhall Vivaro (2014-2019 / MK 2) Replacing the oil filter and oil in the Opel Vivaro with a diesel engine is a task that can be done independently. The steps to be followed are: The

Other guides that may interest you

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where is the oil filter on Opel Vivaro B? Read Answer
    • Vivaro 2001-2014 - Where is the Opel Vivaro oil filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos