Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Vivaro
  6. : Oil filter

Vauxhall Vivaro - Oil filter

Vauxhall Vivaro (2001-2014 / MK 1)
Replacement engine oil and oil filter on Opel Vivaro 2.0 CDTi

Let's see in this video how to remove and replace the engine oil and the oil filter, performing the regular routine maintenance service, on a 2013 Opel Vivaro …read all…
Posted on 12 January 2024 by ScegliAuto
Vauxhall Vivaro (2001-2014 / MK 1)
Removing the oil filter on Opel Vivaro

Replacing the oil filter on an Opel Vivaro, how to do the replacement. We lift the vehicle with a column bridge, unscrew the pin of the oil pan; let the liquid …read all…
Posted on 10 December 2023 by ScegliAuto
Vauxhall Vivaro (2001-2014 / MK 1)
Engine oil and fillter replacement

Raise the vehicle on a lift, remove the lower plastic cover that acts as a stone guard and have access to the oil pan. Then place a basin of suitable capacity …read all…
Posted on 30 July 2023 by ScegliAuto

Airbags (1) Car stereo (4) Battery (2) Gearbox (1) Key (3) Timing belt (4) V-belt (1) Air conditioning controls (1) -board computer (9) Checks and maintenance (44) Cabin air filter (1) Diesel filter (2) Oil filter (3) Injectors (1) Accessory Kit (1) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Dashboard light (1) License plate light (1) Engine (1) Starter motor (6) Engine oil (4) Door panel (1) Front bumper (2) Brake pads (2) Gear Shift Knob (1) Pump (1) Instrument cluster (19) Fuse box (19) Seat (3) Outside rearview mirror (1) Turbine (1) EGR valve (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos