Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Vauxhall Vivaro - Key

Vauxhall Vivaro (2001-2014 / MK 1)
How to replace the battery key of the Opel Vivaro
The steps to replace the flat battery of the key/remote on the Opel Vivaro car are simple and quick, and can be done independently thanks to our short video …read all…
Posted on 2 May 2024 by ScegliAuto
Vauxhall Vivaro (2019-2024 / MK 3, Vivaroc)
How do you replace the battery of the Opel Vivaro remote control?
In order to replace the battery of the Opel Vivaro remote control, you need to pry open the bottom part of the device, so that the cover on the back of the …read all…
Posted on 6 December 2023 by ScegliAuto
Vauxhall Vivaro (2014-2019 / MK 2)
Key battery replacement on Opel Vivaro
Using a small flathead screwdriver (or a pointed object, such as a small scissors or the tip of the cutter) pry into the slot in the key cover, more precisely …read all…
Posted on 6 January 2024 by ScegliAuto
Airbags (1) Car stereo (4) Battery (2) Gearbox (1) Key (3) Timing belt (4) V-belt (1) Air conditioning controls (1) -board computer (9) Checks and maintenance (44) Cabin air filter (1) Diesel filter (2) Oil filter (3) Injectors (1) Accessory Kit (1) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Dashboard light (1) License plate light (1) Engine (1) Starter motor (6) Engine oil (4) Door panel (1) Front bumper (2) Brake pads (2) Gear Shift Knob (1) Pump (1) Instrument cluster (19) Fuse box (19) Seat (3) Outside rearview mirror (1) Turbine (1) EGR valve (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos