Do it yourself
| ||||
|
Vauxhall Vivaro - Engine oil
Vauxhall Vivaro (2014-2019 / MK 2)
How to replace the oil filter and oil on an Opel Vivaro 2 vehicle. Replacing the oil filter and oil in the Opel Vivaro with a diesel engine is a task that can be done independently. The steps to be followed are: The first step …read all… Posted on 30 December 2023 by ScegliAuto
Vauxhall Vivaro (2014-2019 / MK 2)
How do you replace the engine oil of the Opel Vivaro? In order to replace the engine oil of the Opel Vivaro, you need to lift the vehicle with a jack so that you can access the bottom part of the engine …read all… Posted on 13 November 2023 by ScegliAuto
Vauxhall Vivaro (2001-2014 / MK 1)
How to reset the oil service on the Opel Vivaro van? In this tutorial, we can see how to reset the oil service on the Opel Vivaro van, an extremely simple and fast operation, to be performed only after completing …read all… Posted on 12 July 2023 by ScegliAuto
Vauxhall Vivaro (2001-2014 / MK 1)
Removing the oil filter of an Opel Vivaro 1.9 CDTI When replacing the engine oil and the relative filter, it is advisable to also change the air filter and the diesel filter; the engine air filter box is easily …read all… Posted on 2 January 2024 by ScegliAuto Airbags (1) Car stereo (4) Battery (2) Gearbox (1) Key (3) Timing belt (4) V-belt (1) Air conditioning controls (1) -board computer (9) Checks and maintenance (44) Cabin air filter (1) Diesel filter (2) Oil filter (3) Injectors (1) Accessory Kit (1) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Dashboard light (1) License plate light (1) Engine (1) Starter motor (6) Engine oil (4) Door panel (1) Front bumper (2) Brake pads (2) Gear Shift Knob (1) Pump (1) Instrument cluster (19) Fuse box (19) Seat (3) Outside rearview mirror (1) Turbine (1) EGR valve (1) |
How to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |