Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter and Oil on an Opel Vivaro 2

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Replace the oil filter and oil on the Opel Vivaro with a diesel engine as a DIY task. Follow these steps: First, open the oil filler cap to allow the oil to drain.

Second, pour the pre-drain fluid into the reservoir. Third, lift the vehicle with a jack and use a spanner to remove the plastic cover from the oil sump.

Fourth, extract the filter from its housing using a 27 mm spanner. Fifth, insert the new filter.

Sixth, close the sump plug and refit the cover. Seventh, open the filler cap and add approximately 6 litres of new oil.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement on Opel Vivaro 2.0 CDTi
Vauxhall Vivaro (2001-2014 / MK 1) In this video, learn how to remove and replace the engine oil and oil filter while performing the regular maintenance service on a 2013 Opel Vivaro 2…
How to change the engine oil and oil filter on the Opel Vivaro 1.6 CDTi
How to change the engine oil and oil filter on the Opel Vivaro 1.6 CDTi
Vauxhall Vivaro (2014-2019 / MK 2) Below are the steps on how to perform routine maintenance by changing the engine oil and oil filter on the Opel Vivaro 1.6 CDTi. First, lift the vehi…
How to Reset the Service Light on a 2015 Opel Vivaro
How to Reset the Service Light on a 2015 Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light on the 2015 Opel Vivaro involves simple and quick steps that you can perform independently after the service operations, …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos