Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Key

Today, learn how to program the second key for the Opel Vivaro. To perform this operation, you need to use a computer and an OBD cable. Turn on the vehicle's instrument panel and connect the computer cable to the OBD port. The computer display will show the startup process, allowing you to select the vehicle model for key programming via the diagnostic software. The program is very intuitive; just follow the steps indicated on the screen. Once you select the key you wish to program, insert the key into the ignition barrel and follow the indicated steps. Start the instrument panel, then turn it off and on four times. While keeping the key in the ignition, press the door open and close buttons. At the end of the operation, remove the key and disconnect the computer from the port.

Posted on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box on an Opel Vivaro B
Where to Find the Fuse Box on an Opel Vivaro B
Vauxhall Vivaro (2014-2019 / MK 2) If you experience issues with one or more electrical components in your Opel Vivaro B, you can target the respective fuses. In this guide, you will l…
How to reset the Service light on the Opel Vivaro?
How to reset the Service light on the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) To reset the Service light on the Opel Vivaro, press the accelerator pedal and simultaneously turn the key to position two to switch on the instrumen…
How to reset the service light on an Opel Vivaro van?
How to reset the service light on an Opel Vivaro van?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In this tutorial, you will learn how to reset the service light on an Opel Vivaro van, a straightforward and quick operation. Before proceeding, ensu…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos