Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Mount on an Opel Astra G

Model: Vauxhall Astra Astra G - Years 1998-2006
Part: Engine mount

Let's see how to replace the engine mount on an Opel Astra G: the fundamental principle is that you need to lift and support the engine securely to relieve the weight from the mount to be replaced. Remove the air filter box, the intake pipe, and any obstructions; protect the engine with a cloth to prevent dirt from falling inside. Lift and support the car using safety jack stands: never work under a car supported only by a jack. Remove the engine cover and the oil sump cover to gain access. From above, place a jack or a suitable support under the oil sump, lifting it until the weight is relieved from the mount (this is the most difficult step). Unscrew the 6 bolts that secure the mount to the frame and the engine block. Secure the mount bracket and unscrew the mount with a Torx T55 key; clean the mounting seat and fit the new mount, tightening the bolts to 55 Nm. Reassemble all underbody protections, the air box, and all disassembled components in reverse order. This is also an opportunity to check for worn components and replace them.

Posted on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Astra (1998-2006 / Astra G) Remove the starter motor if damaged. Open and lift the front bonnet, then disconnect the battery terminals. Remove the battery and its tray. Locate t…
Vauxhall Astra (1998-2006 / Astra G) In this video, you can see where the water pump is located on an Opel Astra G, useful if it is malfunctioning and you need to replace it. As shown, i…
Vauxhall Astra (2004-2010 / Astra H) In this guide, follow the main steps to remove and replace the timing belt on the Opel Astra H 1.9 CDTI, following the instructions below. First, lif…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos