Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Engine Mount Reinforcements on Opel Astra Version G

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine mount

See other generations:
Video tutorial

In this video, we see an interesting timelapse of the installation of engine mount reinforcements on the Opel Astra Version G. This is a Powerflex accessory available on e-commerce sites like eBay with code 385183202853 at a price of £36.98 per pair plus £14.07 for shipping.

As shown in the video, the installation is not difficult: lift the vehicle from the rear, spray WD-40 to facilitate the removal of the part, then remove the mount and install the two reinforcements after covering them well with grease to prevent squeaking.

Refit the screws after applying thread lock and then tighten everything.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to fit a spoiler on the Opel Astra K version
How to fit a spoiler on the Opel Astra K version
Vauxhall Astra (2015-2022 / Astra K) Let’s see how to fit a stylish rear spoiler on the Opel Astra K version. You can easily find the spoiler on all major e-commerce platforms, such as e…
How to Perform the Pedal Test on an Opel Astra H
How to Perform the Pedal Test on an Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) In this video, you will see how to perform the pedal test on the Opel Astra H, which is the 2004/2010 version. The vehicle must be off, and you need …
How to Replace the Engine Mount on an Opel Astra G
How to Replace the Engine Mount on an Opel Astra G
Vauxhall Astra (1998-2006 / Astra G) Let's see how to replace the engine mount on an Opel Astra G: the fundamental principle is that you need to lift and support the engine securely to r…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos