Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Belt Tensioner on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006

Today, you will see in this short and simple guide how to remove and replace the belt tensioner on an Opel Corsa. First, lift the vehicle and remove the front wheel; then unscrew the fastening screws of the wheel arch to remove it, as shown in the video. Next, remove the V-belt by loosening the tensioner; unscrew the fastening screws of the tensioner to remove it from the engine cover, then replace it with the new one (as well as with the original). Refit the serpentine belt, following the video tutorial until the end!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the drive belt on the Opel Corsa D
How to replace the drive belt on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video we will see how to replace the service belt on the Opel Corsa version D: we will need to lift the vehicle, as we will need to access fr…
Guide to replacing the timing belt of the Opel Corsa
Guide to replacing the timing belt of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Today's main information will show us the process of disassembling and replacing the timing belt of the Opel Corsa. First, we lift the car and start …
How to Replace the Timing Belt on an Opel Corsa C
How to Replace the Timing Belt on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) To replace the timing belt on your Opel Corsa, you need to open the bonnet and remove the front wheel on the driver's side. In the video, the vehicle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos