Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Opel Agila A

Model: Vauxhall Agila Agila A - Years 2000-2007
Part: Warning light – error code

If you have just completed the regular service on your Opel Agila A (2000-2007), but the maintenance light "Insp" continues to illuminate steadily at every start, you will need to reset it manually. First, enter the cabin and ensure the car is off. Next, press and hold the button located just below the speedometer and turn on the ignition. At this point, the display will start to flash. Once it stops flashing, release the button and the reset procedure is successfully completed.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of an Opel Agila
How to Remove the Rear Light of an Opel Agila
Vauxhall Agila (2008-2015 / Agila B) Before you can start, exit the cabin of your Opel Agila and head to the rear of the vehicle. Begin by opening the boot. Next, unscrew and remove the …
How to Reset the Service Light on the Opel Agila
How to Reset the Service Light on the Opel Agila
Vauxhall Agila (2000-2007 / Agila A) Resetting the maintenance light on the Opel Agila is very simple and can be completed in seconds. You do not need any diagnostic tools and can perfor…
How to Turn Off the Service Light on an Opel Agila B?
How to Turn Off the Service Light on an Opel Agila B?
Vauxhall Agila (2008-2015 / Agila B) The service due indicator on the Opel Agila B is signalled to the driver, as is the case for most vehicles, by a spanner-shaped light on the instrume…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos