Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Vauxhall Antara MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

Video tutorial

The cabin air filter is located on the passenger side, under the glove compartment: to replace the filter, you must remove the glove compartment itself; start by unscrewing the three lower fixing screws of the glove compartment, then open the door and unscrew the three upper screws to remove it; once you reach the air duct, remove the protective cap from the cabin air filter housing, extract the old filter, remove any dirt residue, and insert the new filter, ensuring the airflow direction is correct; reverse the process for reassembly.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Vauxhall Antara (2006-2015 / MK 1) This guide explains how to replace the pollen filter in your car. You will need Torx keys to remove the specific screws. The filter is located inside…
Replacing the Fuel Filter on an Opel Antara
Replacing the Fuel Filter on an Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Let’s see how to remove the fuel filter on an Opel Antara. Lift the car with a jack. Unscrew the fastening bolts near the container (disconnect the c…
How to Replace the Engine Oil Filter of the Opel Antara 2.0 CDTI
How to Replace the Engine Oil Filter of the Opel Antara 2.0 CDTI
Vauxhall Antara (2006-2015 / MK 1) Here are the instructions to remove and replace the oil filter of the Opel Antara 2.0 CDTI, as well as the Chevrolet Captiva. First, open the bonnet …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos